Buy Low Price From Here Now
An accessory ring available in Canon EOS mount which converts the lens mount of your SLR camera to a T-Mount. The compatible Opteka T-Mount System makes it possible to use most any single lens reflex camera in combination with various front camera attachments such as telescopes, mirror lenses, slide duplicators...etc. The T-Mount is a metal connector that screws onto the compatible front attachment and allows this combination to be coupled to the Canon SLR camera lens mount.
Readmore
Technical Details
- Screw the T-mount for your camera to the T-mount threading and attach your camera to the T-mount similar to uniting the camera with a lens as normalSee more technical details
By Andrew To (Boston)
This T-mount was purchase for my Canon 10D for my Meade LX200 and my old ETX90. I wasn't sure if this T-mount works for the 10D since the title is so specific about what it is compatible with but no 10D. There is another T-mount in Amazon.com that specified that it works for all these cameras plus 10D but it is a little bit more in price. Since this is my first dSLR and I know that 10D is the only dSLR that takes EF lenses (the new dSLR takes EF and EF-S), I wonder if this T-mount wouldn't work for the 10D. I know the major differences between the EF and EF-S lenses, the coupling mechanism should be identical. That makes me think it is impossible that this T-mount wouldn't work for 10D plus all the other Canon cameras that could take EF lenses.
Fortunately, I was correct. This T-mount works for all Canon cameras that takes the EF type or EF-S type lenses. I wish the description isn't so specific about its compatibility but leaves out some other models. At any case, the quality is solid and it works very well. I didn't notice any flexing with the camera attached to my scope.
Happy with this purchase.
By Elk Prairie
I purchased this for my Rebel XSi. It fits tight and allows connection to my 8" Celestron SC via a Celestron T-adapter-SC, #93633-A. The T-mount also screws onto my 80 mm Orion. I had previously purchased a Celestron T-ring #93413 for an older Canon. The Opteka T-mount is beefier.
By O. C. Winton (Susanville CA)
This adaptor attaches to the Canon 50D and allows me to use my old Vivitar 600mm manual lens with the 50D. No exposure meter, no auto-focus, but by trial and error I found a good exposure setting. This is so much better than having to throw out the old lens. There was no vignetting (with my setup) either.
By Gregory B. Ray (Stafford, Va.)
Works as intended and has good construction. I wish it would utilize the lens lock mechanism, but it doesn't. I wish it had a visible white line on it to assist in lining it up with the lens opening on the camera when it's dark outside, but it doesn't. But for the price, it's good in my book!
By Raul A. Del Portillo (Miami, FL USA)
The Opteka T-mount adapter for Eos does exactly what it says it does. It allows you to use telescopes or mirror lenses on your Eos camera. Even though it says for digitals, it works just as well on older film Canon Eos series cameras.
Just in case you don't know, the t-mount won't pass any electrical information to the lens for stopping down the aperture, or auto focusing. Luckily the lens I used it with has a fixed f8 aperture and manual focus so no worries.
Good build quality, simple, really hard to go wrong with this one. Just make sure you tighten it down properly if not you'll lose infinity focus. If you need it, this will take care of ya.
Used with a Solignor 500mm mirror lens, mounted on a Digital Rebel Xt, and an Elan IIe. Worked perfect with both.
Images Product
Buy Opteka T-Mount Adapter for Canon EOS Rebel T1i, XS, XSi, XTi, XT, 50D, 40D, 30D, 20D, 5D, 1Ds and Mark II SLR Digital Cameras Now
No comments:
Post a Comment